欢迎进入铭奋电子科技官网 - 专业销售半导体封装材料及提供工艺设计和解决方案

Products

产品中心

产品中心

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

产品名称ME8456

所属分类导电胶
概要信息
StressFreeReworkableElectricallyConductiveEpoxyPasteAdhesiveIDEALFOR:LargeAreaDieSubstrateandComponentReworkabilityMismatchedCTE'sDESCRIPTION:ME8456isareworkable,puresilverfilled,electricallyandthermallyconductiveepoxypasteadhesive
产品描述

Stress Free

Reworkable

Electrically Conductive

Epoxy Paste Adhesive

IDEAL FOR:

Large Area Die Substrate and Component Reworkability Mismatched CTE's

DESCRIPTION:

ME8456 is a reworkable, pure silver filled, electrically and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper).

It can be readily reworked from 80 to 100?C and is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE's. Meets Mil-Std 883; Method 5011.5 and NASA-ESA Outgassing Requirements***

AVAILABILITY:

ME8456 is available in syringes for automatic needle dispense applications or in jars. Both viscosity and thixotropic index can be modified to your specific needs.

APPLICATION PROCEDURES:

( 1 ) Thaw sealed at ambient for 30 minutes before using.

( 2 ) Dispense adhesive onto clean substrate.

( 3 ) Pre-bake dispensed adhesive at 80?C for 30 minutes to achieve optimum bonding. Pre-bake not needed in all applications.**

( 4 ) Cure according to one of the recommended cure schedules.

TYPICAL PROPERTIES*

CURE SCHEDULES:

Temperature         Time         Presure

80ºC                 8hr

100ºC                4hr

*125ºC               2 hr         *Recommend

*150ºC               1hr          using prebake 

** For higher temperature curing, above 125ºC  and/or bonding area of over 1x1sq cm, it is recommended the dispensed adhesive be prebaked, open-faced without parts, at 80ºC  for 30 minutes before parts are mounted and cured.

SHELF LIFE:

Storage temperature            Shelf Life

-40ºC                              1yr

Pot Life                           5 days @ 25ºC

*** 24 Hour 125ºC or 100ºC vacuum or air flow oven post bake required to meet outgassing requirements